async function getImageReceiverSurfaceId(): Promise<string | undefined> {
  let receiver: image.ImageReceiver = image.createImageReceiver({ width: 640,height: 480 },4,8);
  console.info('before ImageReceiver check');
  let ImageReceiverSurfaceId: string | undefined = undefined;
  if (receiver !== undefined) {
    console.info('ImageReceiver is ok');
    let ImageReceiverSurfaceId: string = await receiver.getReceivingSurfaceId();
    console.info(`ImageReceived id: ${ImageReceiverSurfaceId}`);
  } else {
    console.error('ImageReceiver is not ok');
  }
  return ImageReceiverSurfaceId;
}

创建XComponent组件Surface。

参考相机预览指导文档。

//xxx.ets
// 创建XComponentController
@Entry
@Component
struct XComponentPage {
  // 创建XComponentController
  mXComponentController: XComponentController = new XComponentController;

  build() {
    Flex() {
      // Create XComponent
      XComponent({
        id: '',
        type: 'surface',
        libraryname: '',
        controller: this.mXComponentController
      })
        .onLoad(() => {
          // Set the width and height of the Surface (1920 * 1080), and set the preview size based on the preview resolution size supported
          // by the current device obtained from previewProfilesArray earlier
          this.mXComponentController.setXComponentSurfaceRect({surfaceWidth:1920,surfaceHeight:1080});
          // Get Surface ID
          let surfaceId: string = this.mXComponentController.getXComponentSurfaceId();
        })
        .width('1920px')
        .height('1080px')
    }
  }
}

实现双路预览。

通过 `createPreviewOutput` 方法将步骤2和步骤3生成的两路 `SurfaceId` 传递到相机服务，创建两路预览流。其余流程按照正常预览流程开发。

import { camera } from '@kit.CameraKit';
import { image } from '@kit.ImageKit';

async function createDualChannelPreview(cameraManager: camera.CameraManager, XComponentSurfaceId: string, receiver: image.ImageReceiver): Promise<void> {
  let camerasDevices: Array<camera.CameraDevice> = cameraManager.getSupportedCameras(); // 获取支持的相机设备对象

  // Get profile object
  let profiles: camera.CameraOutputCapability = cameraManager.getSupportedOutputCapability(camerasDevices[0], camera.SceneMode.NORMAL_PHOTO); // 获取对应相机设备profiles
  let previewProfiles: Array<camera.Profile> = profiles.previewProfiles;

  // Preview Stream 1
  let previewProfilesObj: camera.Profile = previewProfiles[0];

  // Preview Stream 2
  let previewProfilesObj2: camera.Profile = previewProfiles[0];

  // Create preview stream 1 output object
  let previewOutput: camera.PreviewOutput = cameraManager.createPreviewOutput(previewProfilesObj, XComponentSurfaceId);

  // Create preview stream 2 output object
  let imageReceiverSurfaceId: string = await receiver.getReceivingSurfaceId();
  let previewOutput2: camera.PreviewOutput = cameraManager.createPreviewOutput(previewProfilesObj2, imageReceiverSurfaceId);

  // Create cameraInput object
  let cameraInput: camera.CameraInput = cameraManager.createCameraInput(camerasDevices[0]);

  // Turn on the camera
  await cameraInput.open();

  // session flow
  let captureSession = cameraManager.createSession(camera.SceneMode.NORMAL_PHOTO);

  // Start configuring session
  captureSession.beginConfig();

  // Add CameraInput to the conversation
  captureSession.addInput(cameraInput);

  // Add preview stream 1 to the session
  captureSession.addOutput(previewOutput);

  // Add preview stream 2 to the session
  captureSession.addOutput(previewOutput2);

  // Submit configuration information
  await captureSession.commitConfig();

  // session start
  await captureSession.start();
}

通过ImageReceiver实时获取预览图像。

通过ImageReceiver组件的imageArrival事件监听获取底层返回的图像数据。有关详细的API说明，请参考Image API。

import { BusinessError } from '@kit.BasicServicesKit';
import image from '@ohos.multimedia.image';

function onImageArrival(receiver: image.ImageReceiver): void {
  receiver.on('imageArrival', () => {
    receiver.readNextImage((err: BusinessError, nextImage: image.Image) => {
      if (err || nextImage === undefined) {
        return;
      }
      // The current ImageReceiver does not support obtaining YUV data. You can use the JPEG data channel to receive YUV data, but using this method carries risks
      nextImage.getComponent(image.ComponentType.JPEG, (err: BusinessError, imgComponent: image.Component) => {
        if (err || imgComponent === undefined) {
          return;
        }
        if (imgComponent.byteBuffer as ArrayBuffer) {
          // Handle according to business demands
        } else {
          return;
        }
      })
    })
  })
}

参考链接

双路预览(ArkTS)

@ohos.multimedia.image (图片处理)

目录

如何读取相机的预览图

参考链接