Error Message
Install hap timeout.
Symptom
The HAP installation timed out.
Possible Causes
The device connection or the HDC service is abnormal.
Solution
Reconnect the device, or run the hdc kill -r command, and try again.
Error Message
Remove Directory Timeout: XXX.
Symptom
The temporary directory deletion timed out.
Possible Causes
The device connection or the HDC service is abnormal.
Solution
Reconnect the device, or run the hdc kill -r command, and try again.
Error Message
Create Directory Timeout.
Symptom
The temporary directory creation timed out.
Possible Causes
The device connection or the HDC service is abnormal.
Solution
Reconnect the device, or run the hdc kill -r command, and try again.
Error Message
Build package info list is empty.
Symptom
The build package information is empty.
Possible Causes
No valid app package information is generated during the build process.
Solution
Choose Build > Clean Project on the menu bar to clear the cache and try again.
Error Message
Failed to create temporary directory during hap push operation.
Symptom
Failed to create a temporary directory.
Possible Causes
The device connection or the HDC service is abnormal.
Solution
Reconnect the device, or run the hdc kill -r command, and try again.
Error Message
Push Hap Timeout.
Symptom
The HAP push operation timed out.
Possible Causes
A non-original data cable with a low transfer speed is used, or the HDC service is abnormal.
Solution
Use the original data cable, or run the hdc kill -r command, and try again.
Error Message
Start ability failed:The current device version does not support enhance error info. Update device version or deselect the Enhanced Error Info.
Symptom
Failed to start the ability because the device does not support Enhanced Error Info.
Possible Causes
The current device system version does not support the Enhanced Error Info feature.
Solution
Upgrade the device system, or clear the Enhanced Error Info check box in the Run/Debug Configurations panel.
Error Message
The current device version does not support multi thread check. Update device version or deselect the Multi Thread Check.
Symptom
The device does not support Multi Thread Check.
Possible Causes
The current device system version does not support Multi Thread Check.
Solution
Upgrade the device system, or clear the Multi Thread Check check box in the Run/Debug Configurations panel.
Error Message
The current device version does not support the waiting for debugging capability. Update or upgrade the device version.
Symptom
The current device system version does not support the wait-for-debug capability.
Possible Causes
The current device system version does not support the wait-for-debug capability.
Solution
Upgrade the current device system version.
Error Message
Waiting for the debug command times out.
Symptom
The command to set the app into wait-for-debug mode timed out.
Possible Causes
The device connection or the HDC service is abnormal.
Solution
Reconnect the device, or run the hdc kill -r command, and try again.
Error Message
This app is not installed or not signed with a debug signature.
Symptom
The target app is not installed or not signed with a debug certificate.
Possible Causes
Solution