问题现象
通过Canvas画布组件如何实现一个以饼图形式展示进度的效果?该饼图从零开始逐步展示进度的变化过程。
解决方案
- 使用Canvas绘制饼状图,该饼状图由两条直线和一条弧线构成。当两条直线完全重合时,若弧线覆盖整个圆周,则饼状图呈现为一个完整的圆形;若弧线长度为零,则饼状图不包含任何区域,呈现为空状态。
- 将起始角度angle的初始值设置为-90度,在Canvas的onReady方法中,将最大角度参数设置为270度。
@Entry
@Component
struct CircleProgressDemo {
@State radius: number = 0;
@State centerX: number = 0;
@State centerY: number = 0;
private settings: RenderingContextSettings = new RenderingContextSettings(true);
private context: CanvasRenderingContext2D = new CanvasRenderingContext2D(this.settings);
@State angle: number = -90;
private timer: number | null = null;
// this.radius为圆的半径
start() {
this.context.clearRect(-this.radius, -this.radius, this.context.width, this.context.height);
this.context.fillStyle = '#0A59f7';
this.context.beginPath();
// 设置圆心的位置坐标轴为x=0,y=0(也可以把其他点设置为x=0,y=0,但是把这里设置为圆心是最方便计算的)
this.context.moveTo(0, 0);
// 画一条直线,从圆心连到直线终点1
this.context.lineTo(0, -this.radius);
// 画完圆弧的第一条边,开始准备画圆弧,这里需要准备的是圆弧的起始位置和终止位置
// 起始位置为固定值,如上图所示,当前Y=0的位置在中心,所以起始的弧度,沿着圆心向右的那条线,往上走四分之一个圆的弧度即-π/2
let startAngle = -Math.PI / 2;
// 终止位置要根据当前的角度,动态算出即π/180*当前的角度angle
let endAngle = Math.PI / 180 * this.angle;
// 算出角度后,圆心(x=0,y=0),半径(this.radius),起始弧度(startAngle),终止弧度(endAngle),画出圆弧
this.context.arc(0, 0, this.radius, startAngle, endAngle);
// 画出第二条直线,这里上面介绍的三角函数知识可以算出直线终点2的位置对应的x,y轴坐标
let x = this.centerX * Math.cos(Math.PI / 180 * this.angle);
let y = this.centerY * Math.sin(Math.PI / 180 * this.angle);
// 画第二条直线,从圆心,到上面算出来的点
this.context.lineTo(x, y);
// 填充已经画好的饼状图
this.context.fill();
};
aboutToDisappear(): void {
if (this.timer !== null) {
clearInterval(this.timer); // 清理定时器
this.timer = null;
}
};
build() {
Column() {
Canvas(this.context).width(250).height(250).backgroundColor(Color.White)
.onReady(() => {
// 根据画布的宽和高来计算圆形的位置,以及半径
this.centerX = this.context.width / 2;
this.centerY = this.context.height / 2;
this.radius = this.context.width / 2;
this.context.translate(this.centerX, this.centerY);
this.timer = setInterval(() => {
// 未跑完一圈,angle随着时间匀速递增
if (this.angle <= 270) {
this.angle++;
} else {
// 已跑完一圈,归零重新开始
this.angle = -90;
}
this.start();
}, 10);
});
}.justifyContent(FlexAlign.Center)
.height('100%')
.width('100%');
}
}