This topic describes only module-specific error codes. For details about universal error codes, see Universal Error Codes.
The error codes of the file management subsystem include the following:
- User Data Management Error Codes
- User File Access Error Codes
- Space Statistics Error Codes
- Device-Cloud Synchronization Error Codes
[h2]13900001 Operation Not Permitted
Error Message
Operation not permitted
Description
The operation is not allowed.
Possible Causes
The caller does not have the permission to access the URI or path.
Solution
-
Check whether the caller cannot use the URI shared by another application. For details, see access control mechanisms of the system.
-
Check whether the permission is obtained by Picker. The permission obtained by Picker is temporary. For details, see System Pickers.
-
Check whether the URI is a concatenated path, which has no permission by default.
[h2]13900002 File or Directory Not Exist
Error Message
No such file or directory
Description
The file or directory does not exist.
Possible Causes
The file or directory does not exist.
Solution
Check whether the file directory exists.
[h2]13900003 Process Not Exist
Error Message
No such process
Description
No such process exists.
Possible Causes
This error code is reported if a process does not exist.
Solution
-
Check whether the process is killed unexpectedly.
-
Check whether the service related to the process has started.
[h2]13900004 System Call Interrupted
Error Message
Interrupted system call
Description
The system call is interrupted.
Possible Causes
The system call is interrupted by another thread.
Solution
-
Check the multi-thread code logic.
-
Invoke the system call again.
[h2]13900005 I/O Error
Error Message
I/O error
Description
I/O error.
Possible Causes
Underlying I/O error: It is usually related to hardware or driver device faults.
-
Hardware fault: The device is physically damaged and I/O instructions cannot be executed.
-
Communication link interruption: The link is disconnected during data transmission.
-
Driver error: The driver is abnormal or the driver version is incompatible.
Solution
-
Check whether the hardware is normal.
-
Check whether the USB device is properly connected.
-
Check and update the driver.
[h2]13900006 Device or Address Not Exist
Error Message
No such device or address
Description
The device or address does not exist.
Possible Causes
The device information or address is incorrect.
Solution
Check that the device information or address is correct.
[h2]13900007 Long Parameter List
Error Message
Arg list too long
Description
The parameter list is too long.
Possible Causes
The parameter list is too long.
Solution
Reduce the number of parameters.
[h2]13900008 Abnormal File Descriptor
Error Message
Bad file descriptor
Description
The file descriptor is abnormal.
Possible Causes
-
This file descriptor is closed.
-
The read and write permissions on the file do not match the settings.
Solution
-
Check whether the file descriptor is closed.
-
Check that the permissions on the file match the settings.
[h2]13900009 Child Process Not Exist
Error Message
No child processes
Description
No child process exists.
Possible Causes
The child process cannot be created.
Solution
Check the maximum number of processes in the system.
[h2]13900011 Memory Overflow
Error Message
Out of memory
Description
A memory overflow occurs.
Possible Causes
A memory overflow occurs.
Solution
-
Check the memory overhead.
-
Control the memory overhead.
[h2]13900012 Permission Denied
Error Message
Permission denied
Description
The permission is denied.
Possible Causes
-
The operation is intercepted by DAC or SELinux.
-
The file sandbox path is incorrect.
Solution
-
Check the UGO permission of the file.
-
Check the kernel log for AVC log information. If yes, You can visit the HUAWEI Developers website and click Online ticket submission under Support for help.
-
Check whether the file path is a sandbox path. The file management system does not allow operations on files outside the sandbox directory. For details, see Application Sandbox Directory and Application Sandbox Path.
[h2]13900013 Incorrect Address
Error Message
Bad address
Description
The address is incorrect.
Possible Causes
The address is incorrect.
Solution
Check that the address is correct.
[h2]13900014 Device or Resource Not Available
Error Message
Device or resource busy
Description
The device or resource is busy.
Possible Causes
The requested resource is unavailable.
Solution
Request the resource again.
[h2]13900015 File Already Exists
Error Message
File exists
Description
The file already exists.
Possible Causes
The file to be created already exists.
Solution
Check whether the file path is correct.
[h2]13900016 Invalid Cross-Device Link
Error Message
Cross-device link
Description
The cross-device link is invalid.
Possible Causes
The link between devices is incorrect.
Solution
Check the devices and create the link correctly.
[h2]13900017 Device Not Exist
Error Message
No such device
Description
The device does not exist.
Possible Causes
The device is not identified.
Solution
Check the connection to the target device.
[h2]13900018 Invalid Directory
Error Message
Not a directory
Description
The specified directory is invalid.
Possible Causes
The specified directory is invalid.
Solution
Check that the specified data is correct.
[h2]13900019 The Specified Object Is a Directory
Error Message
Is a directory
Description
The specified object is a directory.
Possible Causes
The specified object is a directory.
Solution
Check that the specified data is correct.
[h2]13900020 Invalid Parameter
Error Message
Invalid argument
Description
The parameter is invalid.
Possible Causes
The input parameter is invalid.
Solution
Check that the input parameters are valid.
[h2]13900021 Too Many File Descriptors Opened
Error Message
File table overflow
Description
Too many file descriptors are opened.
Possible Causes
The number of file descriptors opened has reached the limit.
Solution
Close the file descriptors that are no longer required.
[h2]13900022 Too Many Files Opened
Error Message
Too many open files
Description
Too many files are opened.
Possible Causes
The number of files opened has reached the limit.
Solution
Close the files that are not required.
[h2]13900023 Text File Not Respond
Error Message
Text file busy
Description
The text file is busy.
Possible Causes
The executable file of the program is in use.
Solution
Close the program that is being debugged.
[h2]13900024 File Oversized
Error Message
File too large
Description
The file is too large.
Possible Causes
The file size exceeds the limit.
Solution
Check whether the file size exceeds the limit.
[h2]13900025 Insufficient Space on the Device
Error Message
No space left on device
Description
The remaining space on the device is insufficient.
Possible Causes
The device storage space is insufficient.
Solution
Clear the space of the device.
[h2]13900026 Invalid Shift
Error Message
Illegal seek
Description
Invalid shift.
Possible Causes
Seek is used in pipe or FIFO.
Solution
Check the use of seek().
[h2]13900027 Read-Only File System
Error Message
Read-only file system
Description
This is a read-only file system.
Possible Causes
The file system allows read operations only.
Solution
Check whether the file is read-only.
[h2]13900028 Links Reach the Limit
Error Message
Too many links
Description
There are too many links.
Possible Causes
The number of links to the file has reached the limit.
Solution
Delete the links that are no longer required.
[h2]13900029 Resource Deadlock
Error Message
Resource deadlock would occur
Description
Resource deadlock occurs.
Possible Causes
Resource deadlock occurs.
Solution
Terminate the deadlock process.
[h2]13900030 Long File Name
Error Message
Filename too Long
Description
The file name is too long.
Possible Causes
The file name length exceeds 255 bytes.
Solution
Check the file name length.
[h2]13900031 Function Not Implemented
Error Message
Function not implemented
Description
The function is not implemented.
Possible Causes
The function is not supported by the system.
Solution
Check the system version and update the system if required.
[h2]13900032 Directory Not Empty
Error Message
Directory not empty
Description
The directory is not empty.
Possible Causes
The specified directory is not empty.
Solution
-
Check the directory.
-
Ensure that the directory is empty.
[h2]13900033 Too Many Symbol Links
Error Message
Too many symbolic links encountered
Description
There are too many symbolic links.
Possible Causes
There are too many symbolic links.
Solution
Delete unnecessary symbol links.
[h2]13900034 Operation Blocked
Error Message
Operation would block
Description
The operation is blocked.
Possible Causes
The operation is blocked.
Solution
Perform the operation again.
[h2]13900035 Invalid File Descriptor
Error Message
Invalid request descriptor
Description
The requested file descriptor is invalid.
Possible Causes
The requested file descriptor is invalid.
Solution
Check that the file descriptor is valid.
[h2]13900036 Target Is Not a Character Stream Device
Error Message
Device not a stream
Description
The device is not a character stream.
Possible Causes
The device pointed to by the file descriptor is not a character stream device.
Solution
Check whether the file descriptor points to a stream.
[h2]13900037 No Data Available
Error Message
No data available
Description
No data is available.
Possible Causes
The required data is not available.
Solution
Request the data again.
[h2]13900038 Value Mismatches the Data Type
Error Message
Value too large for defined data type
Description
The variable value exceeds the maximum value specified by the data type.
Possible Causes
The specified value is out of the range defined for the data type.
Solution
Modify the data type.
[h2]13900039 File Descriptor Corrupted
Error Message
File descriptor in bad state
Description
The file descriptor is in an abnormal state.
Possible Causes
The file descriptor is corrupted.
Solution
Check that the file descriptor is valid.
[h2]13900040 System Call Not Started
Error Message
Interrupted system call should be restarted
Description
The interrupted system call should be restarted.
Possible Causes
The system call is interrupted.
Solution
Invoke the system call again.
[h2]13900041 Disk Quota Exceeded
Error Message
Quota exceeded
Description
The disk quota is exceeded.
Possible Causes
Insufficient storage space.
Solution
Clear disk space.
[h2]13900042 Unknown Error
Error Message
Unknown error
Description
Unknown error.
Possible Causes
Internal error
Solution
-
Call the API again.
-
Restart the service.
[h2]13900043 No Available Lock
Error Message
No record is locks available
Description
No lock is available.
Possible Causes
System resources are insufficient.
Solution
Wait until a lock is released and try again.
[h2]13900044 Network Access Failure
Error Message
Network is unreachable
Description
The network cannot be accessed.
Possible Causes
A network error occurs.
Solution
Check the network status.
[h2]13900045 Connection Failed
Error Message
Connection failed
Description
The connection fails.
Possible Causes
The device is abnormal, or Wi-Fi or Bluetooth is unavailable.
Solution
-
Check that the device is in normal status.
-
Check that Wi-Fi and Bluetooth are available.
[h2]13900046 Connection Interrupted by Software
Error Message
Software caused connection abort
Description
The connection is interrupted by software.
Possible Causes
The device goes offline, or the Wi-Fi or Bluetooth is disconnected.
Solution
-
Check that the device is in normal status.
-
Check that Wi-Fi and Bluetooth are available.
[h2]14000001 Invalid File Name
Error Message
Invalid file name
Possible Causes
The file name contains invalid characters.
Solution
Modify the file name.
[h2]14000002 Invalid URI
Error Message
Invalid URI
Possible Causes
The URI is invalid.
Solution
Use the obtained URI.
[h2]14000003 Invalid File Name Extension
Error Message
Invalid file name extension
Possible Causes
The file name extension is incorrect.
Solution
Modify the file name extension.
[h2]14000004 File in Recycle Bin
Error Message
File already in the recycle bin
Possible Causes
The file is moved to the Recycle Bin.
Solution
Check whether the file is in the Recycle Bin.
[h2]14000011 Internal System Error
Error Message
System inner fail
Possible Causes
An unidentified error occurs in the system.
Solution
Clear the background or restart the device.
[h2]14000014 Invalid Member Name
Error Message
Member is not a valid PhotoKey
Possible Causes
The input string is not a member name of a class or interface.
Solution
Ensure that the input string is the member name of the class or interface.
[h2]13600001 IPC Failed
Error Message
IPC error
Description
IPC fails.
Possible Causes
The called service does not exist.
Solution
Check whether the service is started.
[h2]13600002 File System Not Supported
Error Message
File system not supported
Description
The file system is not supported.
Possible Causes
The file system is not supported.
Solution
Use a supported file system.
[h2]13600003 Mount Failed
Error Message
Mount failed
Description
The mounting fails.
Possible Causes
The mount command fails.
Solution
Remove the card and run the mount command again.
[h2]13600004 Unmount Failed
Error Message
Unmount failed
Description
The unmounting fails.
Possible Causes
The device does not respond.
Solution
Check whether the file is being used. If yes, kill the thread that uses the file.
[h2]13600005 Incorrect Volume State
Error Message
Incorrect volume state
Description
The volume state is incorrect.
Possible Causes
The volume state is incorrect.
Solution
Check whether the current volume state is correct.
[h2]13600006 Failed to Create a Directory or Node
Error Message
Failed to create the directory or node
Description
Failed to create a directory or node.
Possible Causes
The directory or node to be created already exists.
Solution
Check whether the directory or node to be created already exists.
[h2]13600007 Failed to Delete a Directory or Node
Error Message
Failed to delete the directory or node
Description
Failed to delete the directory or node.
Possible Causes
The specified directory or node has been deleted.
Solution
Check whether the specified directory or node exists.
[h2]13600008 Object Not Exist
Error Message
No such object
Description
The operation object does not exist.
Possible Causes
-
The specified volume ID is incorrect.
-
The specified bundle name is incorrect.
Solution
-
Check whether the specified volume exists.
-
Check whether the specified bundle name exists.
[h2]13600009 Invalid User ID
Error Message
User ID out of range
Description
The user ID is out of range.
Possible Causes
The specified user ID is incorrect.
Solution
Check that the user ID is correct.
[h2]13600010 Invalid Input Parameter
Error Message
The input parameter is invalid.
Description
The input parameter is invalid.
Possible Causes
The input parameter is incorrect.
Solution
Check whether the input parameter is within the invalid range.
[h2]13600011 Failed to Report the Space Usage of a Specified Service
Error Message
Failed to report the specified business space usage.
Description
Failed to report the space usage of a specified service.
Possible Causes
The interaction with the database is abnormal.
Solution
Restart the device and try again.
[h2]13600012 Failed to Query the Space Usage of a Specified Service
Error Message
Failed to query the specified business space usage.
Description
Failed to query the space usage of a specified service.
Possible Causes
The interaction with the database is abnormal.
Solution
Restart the device and try again.
[h2]13600013 Failed to Query the Space Usage of All Services
Error Message
Failed to query all business space usage.
Description
Failed to query the space usage of all services.
Possible Causes
The interaction with the database is abnormal.
Solution
Restart the device and try again.
[h2]13600015 Failed to Obtain Disk Space Usage Information
Error Message
Failed to traverse the query data partition directory.
Description
Failed to obtain the disk space usage information.
Possible Causes
The underlying file system is abnormal.
Solution
Restart the device and try again.
[h2]13600016 Failed to Obtain the Number of Inodes in the File System
Error Message
Failed to query the inode information of the data partition.
Description
Failed to obtain the inode information of the data partition.
Possible Causes
The underlying file system is abnormal.
Solution
Restart the device and try again.
[h2]13600017 Failed to Obtain the Inode Usage of the Current Application
Error Message
Failed to query the inode information of the application.
Description
Failed to obtain the inode usage of the current application.
Possible Causes
The underlying file system is abnormal.
Solution
Restart the device and try again.
[h2]13600018 Failed to Query the System Data Size
Error Message
Failed to query the system data size.
Description
Failed to query the system data size.
Possible Causes
The underlying file system is abnormal.
Solution
Restart the device and try again.
[h2]14300001 IPC Failed
Error Message
IPC error
Description
IPC fails.
Possible Causes
-
The server service does not exist.
-
The extension mechanism is abnormal.
Solution
Check that the server service exists.
[h2]14300002 Incorrect URI Format
Error Message
Invalid URI
Description
The URI format is incorrect.
Possible Causes
The URI is invalid.
Solution
Check that the URI is in correct format.
[h2]14300003 Failed to Obtain the Server Ability Information
Error Message
Failed to obtain the server ability information
Description
Failed to obtain the server ability information.
Possible Causes
The BMS interface is abnormal.
Solution
Check for basic system capability errors. You can visit the HUAWEI Developers website and click Online ticket submission under Support for help.
[h2]14300004 Incorrect Result Returned by js-server
Error Message
Incorrect result returned by js-server
Description
An incorrect result is returned by js-server.
Possible Causes
The data returned by the server is incorrect.
Solution
Check the data returned by the server.
[h2]14300005 Failed to Register Notify
Error Message
Failed to register notify
Description
Failed to register notify.
Possible Causes
-
The server service does not exist.
-
The extension mechanism is abnormal.
Solution
Check that the server service exists.
[h2]14300006 Failed to Unregister Notify
Error Message
Failed to unregister notify
Description
Failed to remove the notify.
Possible Causes
-
The server service does not exist.
-
The extension mechanism is abnormal.
Solution
Check that the server service exists.
[h2]14300007 Failed to Initialize the Notify Agent
Error Message
Failed to initialize the notify agent
Description
The notify agent fails to be initialized.
Possible Causes
The specified Notify agent has not been registered.
Solution
Check whether the Notify agent has been registered.
[h2]14300008 Failed to Notify the Agent
Error Message
Failed to notify the agent
Description
The js-server fails to notify the agent.
Possible Causes
-
The service does not exist.
-
The extension mechanism is abnormal.
Solution
Check whether the client is normal.
[h2]22400003 Low Battery Level
Error Message
Low battery level
Possible Causes
The battery level is low.
Solution
Perform the operation after the battery is being charged or the battery level is restored.
[h2]22400004 Maximum Number of Input Parameters Reached
Error Message
Exceeded the maximum limit
Possible Causes
The number of requests exceeds the upper limit defined by API specifications.
Solution
Check the input parameters and ensure that the number of requests meets the specifications.
[h2]22400005 Internal Error
Error Message
Inner error
Possible Causes
-
The internal database request fails or the SQL statement fails to be executed.
-
An exception such as a null pointer occurs in the system.
-
The system memory is insufficient or abnormal.
-
The JS framework is abnormal.
Solution
Check for basic system capability errors. You can visit the HUAWEI Developers website and click Online ticket submission under Support for help.
[h2]22400006 Task Running of the Same Type
Error Message
The same task is already in progress
Possible Causes
A task of the same type is running.
Solution
Wait until the existing tasks of the same type are complete, or call stop() to stop the existing tasks and trigger a new task.
[h2]22400007 Historical File Specified to Replace the Original File Not Exist
Error Message
The version file specified to replace the original file does not exist
Possible Causes
The files of earlier versions are not downloaded or have been deleted.
Solution
Download the specified historical version file again. Ensure that the file exists.