This topic describes only module-specific error codes. For details about universal error codes, see Universal Error Codes.
8300001 Input Parameter Value Out of Range
Error Message
The input parameter value is out of range.
Description
This error code is reported if the value of the input parameter (for example, slotId) is not within the valid range. In this case, the API call will fail and the corresponding operation cannot be performed.
Possible Causes
The input parameter value is invalid.
Procedure
Enter a valid parameter value.
8300002 Service Connection Error
Error Message
Service connection failed.
Description
This error code is reported if the attempt to connect to a service fails.
Possible Causes
Service startup or IPC connection has failed.
Procedure
Operation error. Try again later.
8300003 System Internal Error
Error Message
System internal error.
Description
This error code is reported if an internal system error occurs.
Possible Causes
The possible cause is that data read/write has failed because the network is abnormal.
Procedure
Operation error. Try again later.
8300004 SIM Card Not Detected
Error Message
No SIM card found.
Description
This error code is reported if no SIM card is detected.
Possible Causes
No SIM card is inserted or the SIM card is not properly inserted.
Procedure
Insert the SIM card or remove and insert the SIM card again.
8300999 Internal Error
Error Message
Internal error.
Description
This error code is reported if an internal error occurs.
Possible Causes
The problem may arise due to insufficient memory, memory operation errors, or null pointers.
Procedure
Operation error. Try again later.
8301001 SIM Card Not Activated
Error Message
SIM card is not activated.
Description
This error code is reported if the SIM card is not activated.
Possible Causes
The SIM card is not activated.
Procedure
Activate the SIM card.
8301002 Failed to Read or Update SIM Card Data
Error Message
The SIM card failed to read or update data.
Description
This error code is reported if the attempt to read or update SIM card data has failed.
Possible Causes
The SIM card does not support the operation, or the SIM card is damaged.
Procedure
Contact the SIM card supplier, or replace the SIM card.
8301003 Incorrect SIM Card Configuration
Error Message
Operator config error.
Description
This error code is reported if the SIM card configuration is incorrect.
Possible Causes
The configuration file delivered with the SIM card is not properly preconfigured.
Procedure
Check whether the correct SIM card is inserted.
8401001 Failed to Connect to the UT
Error Message
UT is not connected.
Description
This error code is reported if the UT is not connected.
Possible Causes
The current carrier does not support sending of UT requests over a Wi-Fi network, but the device is connected to the Wi-Fi network.
Procedure
Disconnect the Wi-Fi network and resend the UT request.
8401002 Incorrect Number
Error Message
Invalid input call number.
Description
The entered number is invalid.
Possible Causes
The user queries the call forwarding status of card A, but card A is not inserted into the current phone.
Procedure
Insert card A into the current phone.
8401003 Frequent Operations
Error Message
Operation too frequent.
Description
Too frequent operations.
Possible Causes
The call forwarding status of the same type is queried consecutively within 30 seconds.
Procedure
Perform the operation again after 30 seconds.
3120001 Service Connection Error
Error Message
Service connection failed.
Description
This error code is reported if the attempt to connect to a service fails.
Possible Causes
Service startup or IPC connection has failed.
Procedure
Operation error. Try again later.
3120002 System Internal Error
Error Message
System internal error.
Description
This error code is reported if an internal system error occurs.
Possible Causes
The possible cause is that data read/write has failed because the network is abnormal.
Procedure
Operation error. Try again later.
8800001 Input Parameter Value Out of Range
Error Message
The input parameter value is out of range.
Description
This error code is reported if the value of the input parameter (for example, slotId) is not within the valid range. In this case, the API call will fail and the corresponding operation cannot be performed.
Possible Causes
The input parameter value is invalid.
Procedure
Enter a valid parameter value.
8800002 Service Connection Error
Error Message
Service connection failed.
Description
This error code is reported if the attempt to connect to a service fails.
Possible Causes
Service startup or IPC connection has failed.
Procedure
Operation error. Try again later.